19" Forged Wheels for Tesla Model 3 & Model Y – 19×9.5J ET35 | Set of 4

Forged 19-inch fitment for compatible Tesla Model 3 and Model Y configurations.

Upgrade your Tesla with a fully forged 6061-T6 aluminum wheel built around a versatile 19×9.5J ET35 specification. Each wheel weighs approximately 11.5 kg and carries an 850 kg load rating, combining everyday durability, responsive handling and a wider OEM+ stance.

• Set of four forged wheels
• 19×9.5J with ET35 offset
• Approximately 11.5 kg per wheel
• 850 kg load rating per wheel
• 5×114.3 bolt pattern
• 64.1 mm hub-centric center bore on verified standard-hub applications
  
• Matte Graphite Gray finish

Fitment checkpoint: Designed for the listed standard-brake configurations at factory or OEM+ ride height. Performance models, 70.1 mm hub-step applications, lowered vehicles, aftermarket brakes and modified suspension require confirmation before ordering.

Forged Performance Without Oversizing

These 19-inch forged wheels deliver a wider, more planted appearance while preserving the ride comfort and tire practicality of a 19-inch setup.

The 9.5J width provides improved tire support, while the ET35 offset creates a more assertive OEM+ stance without relying on an oversized wheel diameter.

Real Weight, Honest Comparison

At approximately 11.5 kg per wheel, this wheel offers a meaningful reduction compared with selected Tesla Model Y factory 19-inch wheels:

• Approximately 1.9–2.1 kg lighter per wheel
• Approximately 7.6–8.4 kg lighter per set
• Up to approximately 15% lower wheel weight

For the Model 3, the weight is approximately comparable to the narrower factory 19×8.5J Sport wheel while providing a full 9.5J width for a wider tire and more performance-focused stance.

Reducing wheel mass may improve steering response, suspension control and braking feel. Actual range, acceleration and ride characteristics also depend on tire size, tire weight, pressure, alignment and driving conditions.

Weight comparison is based on selected OEM 19-inch wheels without tires, TPMS sensors or aero covers. OEM wheel weights may vary by model year, supplier and finish.

Fully Forged 6061-T6 Construction

Each wheel is manufactured from forged 6061-T6 aluminum to provide an effective balance of strength, weight and durability for the higher vehicle weight and instant torque of Tesla vehicles.

With an 850 kg load rating per wheel, it is suitable for compatible Model 3 and Model Y configurations when used with correctly rated tires.

OEM+ Fitment

The 19×9.5J ET35 specification is designed to create a wider, more planted stance:

• Model Y: approximately 10 mm further outward than a typical 19×9.5J ET45 factory wheel
• Model 3: approximately 18 mm further outward and approximately 8 mm less inner clearance than a typical 19×8.5J ET40 factory wheel
• Direct 64.1 mm hub-centric fitment on verified standard-hub applications
• Uses 60° conical-seat lug nuts; confirm lug-hole and tool clearance before installation

Vehicles with lowered suspension, modified alignment, wheel spacers, aftermarket brakes or unusually wide tire profiles require an individual clearance check.

Vehicle Compatibility

Compatible with the following standard-brake configurations:

• Tesla Model 3 RWD / Long Range: 2017–2023
• Tesla Model 3 Highland RWD / Long Range: 2024–Present
• Tesla Model Y RWD / Long Range: 2020–2024
• Tesla Model Y Juniper RWD / Long Range: 2025–Present

Not compatible with Tesla Model S, Model X or Cybertruck.

Recommended Tire Sizes

Model 3 / Model 3 Highland

• 265/35R19 – performance-focused option with an overall diameter close to the original 19-inch setup; verify vehicle and tire-brand clearance before installation

Model Y / Model Y Juniper

• 255/45R19 – recommended OEM-style tire size

Always select tires with a load index and speed rating that meet or exceed the requirements shown on the vehicle’s Tire and Loading Information label. Tire dimensions can vary slightly between manufacturers.

Technical Specifications

Important Fitment and Installation Notice

Fitment can vary by model year, trim, suspension height, brake package and tire brand. Customers with Performance models, aftermarket brakes, wheel spacers, modified alignment or lowered suspension should provide their vehicle year and trim before ordering.

Professional installation is recommended. Wheel fasteners should be tightened according to the vehicle manufacturer’s specifications and rechecked after the initial driving period.

Custom Orders

For a custom color or size, contact Tesery customer support before ordering. Custom configurations may require additional production time.

Standard Matte Graphite Gray orders follow the applicable Tesery return policy. Custom orders are final sale except in cases of manufacturing defect, shipping damage or rights provided by applicable law.