mysite

Chrome Side Repeater Camera for Tesla Model 3 (2017–2020)

$119.99

Sale Sold out

Shipping calculated at checkout.

Side Left Side (1 piece) Right Side (1 piece)

TESERY · Model 3 replacement parts

The familiar chrome finish.
The side view you rely on.

Replace the side repeater camera and turn-signal assembly on your 2017–2020 Tesla Model 3. Keep the original chrome look, with a complete replacement for the side that needs repair.

Model 3 · 2017–2020Original chrome styleLeft or right · sold individually

Chrome side repeater camera and turn signal assembly for Tesla Model 3 2017–2020

Your fit. Already narrowed down.

For the original
chrome Model 3.

This assembly is for 2017–2020 Tesla Model 3 with the original chrome side repeater cameras fitted to the front fenders, just behind the front wheels. The choice here is simple: select the left or right side of your vehicle.

Your vehicle	Which part to choose
2017, 2018, 2019 or 2020 Model 3 with original chrome repeaters	Choose Left Side or Right Side in this listing.
2021+ Model 3, including Highland	Choose the replacement for your later camera hardware.
Model Y, Model S, Model X or Cybertruck	Choose a model-specific camera assembly.
A car already converted to different camera hardware	Share the existing camera’s part label with TESERY. We’ll help identify the replacement for that conversion.

This is a replacement for the original chrome assembly, not an upgrade to HW4/AI4 cameras. A wrap or chrome-delete cover does not by itself change the camera underneath.

Only one selection

Which side needs replacing?

Left and right are always viewed from inside the car, facing forward. These directions stay the same whether the steering wheel is on the left or the right.

Model 3 left and right side repeater selection guide viewed from above with the front of the car at the top

LEFT SIDE · 1 PIECE

The vehicle’s left fender.

Driver’s side on a left-hand-drive car. Passenger’s side on a right-hand-drive car.

Reference: 1125106-77-H

RIGHT SIDE · 1 PIECE

The vehicle’s right fender.

Passenger’s side on a left-hand-drive car. Driver’s side on a right-hand-drive car.

Reference: 1125107-77-H

Each option supplies one assembly. To replace both sides, add one Left Side and one Right Side to your order.

Chrome Model 3 side repeater showing the camera lens, turn signal strip and integrated housing

One complete assembly

Camera.
Signal.
Chrome.

The camera, side turn-signal light and chrome-finished outer trim come together in the replacement housing. Built-in mounting features position the assembly in the existing fender opening.

For a diagnosed failed camera, damaged repeater or broken housing, this gives you a complete replacement for the affected side. The vehicle’s wiring harness and installation tools are separate.

Keep the repair focused

Restore the part.
Keep the original look.

Match the chrome exterior.

The silver chrome finish complements the original 2017–2020 Model 3 trim, so a single-side repair keeps the exterior consistent.

Replace only the affected side.

Left and right assemblies are available individually. Order the part your repair needs without purchasing a second camera unnecessarily.

If the only damage is cosmetic trim and the camera, light and housing still work correctly, a trim-only repair may be sufficient. A black camera feed or warning can also come from wiring or another system fault; a technician can confirm which component needs repair before fitting.

Plan the installation

Fit. Reset. Recalibrate.

Have a Tesla-experienced technician complete the repair and software checks. The assembly fits into the front fender; the repair also includes reconnecting the camera and lamp wiring and completing the applicable reset and calibration procedure.

Fit the correct side.

Protect the paint, remove the existing repeater, connect the replacement and seat the mounting features securely.

Reset and clear calibration.

Follow Tesla’s side repeater replacement procedure, including the DAS reset and camera calibration steps applicable to the vehicle.

Check the view and signal.

Verify the camera feed, turn-signal operation and secure fit. Complete the required manual-driving calibration before relying on the affected driver-assistance features.

Tesla notes that self-calibration can require up to 100 miles (160 km), depending on road conditions. See the for the complete installation sequence.

Why buy from TESERY

The right details.
Before you order.

A choice you can understand.

Clear years, a defined chrome-hardware application and one-piece left/right options make it easy to order the part your repair needs.

Support that starts with your car.

If your camera hardware has been changed, share a photo and the existing part label through TESERY store chat. We’ll help you identify the right replacement before you place the order.

Keep your fitment details, order and after-sales support together with TESERY. Review our and for your destination and order.

Before you order

Questions, answered.

Is this the camera assembly or just a chrome cover?

This is one complete side repeater camera and turn-signal assembly with chrome outer trim and its housing. It is not a decorative overlay.

Does this fit my 2017–2020 Model 3?

Yes, for a Model 3 retaining its original chrome side repeater hardware. Choose the side that needs replacement. If a previous repair or conversion changed the camera hardware, TESERY can identify that configuration from a photo and the existing part label.

Can I use it on a 2021 or newer Model 3, or on Model Y?

This listing covers the original chrome 2017–2020 Model 3 application. Choose a separate listing matched to the later Model 3 or Model Y camera hardware.

Is left the driver’s side?

On a left-hand-drive car, yes. On a right-hand-drive car, the vehicle’s left side is the passenger’s side. Use the side guide above: imagine sitting in the car and looking forward.

Will I receive a pair?

No. Each selection is one camera-and-light assembly. For both sides, add one Left Side and one Right Side to the cart.

Is calibration needed?

Yes. Tesla’s procedure requires camera calibration data to be cleared when a camera is moved, and includes the applicable reset routines after replacement. The vehicle then self-calibrates during manual driving. Plan this into the repair.

Is this a genuine Tesla part?

This is a new aftermarket replacement offered by TESERY for the compatible Model 3 application listed above. The reference numbers identify the replacement application.

Does it add newer Autopilot hardware or remove turn-signal glare?

It replaces the original-style side repeater assembly. It does not add HW4/AI4 capability, unlock software features or constitute a verified anti-glare camera upgrade.

Made simple